Guns and Self-Defense > Guns/Firearms
Question on proper gun cleaning
Every Jew AK47:
You don't want too much oil in the barrel, you can cause serious damage to the gun and yourself. Just a very light coating. You put a bit of oil on a patch or you can use Break Free CLP that already contains a small amount of oil (enough for what you need) and you run it through after your done cleaning. You then put a dry patch through the barrel to wipe off the excess. The very think coat left after running the dry patch through the gun will be all you need. If your using an AR, they like to be run wet, so make sure you spray lube the bolt assembly. All bolts on guns should receive some lube as that makes them run better.
Remember if your cleaning ARs to clean from the action to through the muzzle, not the muzzle to action, to avoid scarring your rifling.
Navigation
[0] Message Index
[*] Previous page
Go to full version